Emergency Shower And Eyewash Station
video

Emergency Shower And Eyewash Station

The Emergency Shower and Eyewash Station combines full-body drenching and eye-flushing functions in a single fixed installation. It is our most mature product with the highest shipment volume. This unit connects to your existing water supply line. It provides immediate rinsing for workers exposed to hazardous chemicals. The design meets ANSI/ISEA Z358.1 requirements for emergency response. This product serves chemical plants, semiconductor fabs, and pharmaceutical facilities. It is available for OEM replacement, aftermarket distribution, and bulk procurement.
Send Inquiry
Product Introduction

Emergency Shower and Eyewash Station

 
411

● Fixed Combination Safety Unit

The Emergency Shower and Eyewash Station combines full-body drenching and eye-flushing functions in a single fixed installation. It is our most mature product with the highest shipment volume. This unit connects to your existing water supply line. It provides immediate rinsing for workers exposed to hazardous chemicals. The design meets ANSI/ISEA Z358.1 requirements for emergency response. This product serves chemical plants, semiconductor fabs, and pharmaceutical facilities. It is available for OEM replacement, aftermarket distribution, and bulk procurement.

● Where This Unit Is Installed

This unit is designed for fixed indoor installation in areas with chemical exposure risks. Typical locations include production lines, chemical storage areas, wet process sections, and cleanrooms. It works in chemical processing, petroleum refining, electronics manufacturing, and laboratory settings. The unit requires a stable water supply with pressure between 30 and 80 psi.

 

Technical Specifications
 

 

Parameter

Specification

Pipe Material

304 Stainless Steel, 1-1/4" Diameter

Base Material

22.9cm Cast Iron with Epoxy Coating

Basin Material

27.9cm ABS Plastic

Water Inlet Connection

1-1/4" FNPT

Water Outlet Connection

1-1/4" FNPT

Shower Flow Rate

≥75.7 L/min

Eye/Face Wash Flow Rate

≥11.4 L/min

Operating Water Pressure

30-80 psi

Basin Inlet Strainer

50-mesh Stainless Steel Filter

Eye Wash Valve

304 Stainless Steel Ball Valve with Flag Handle

Shower Valve

304 Stainless Steel Ball Valve with Triangular Rod

Compliance Standard

ANSI/ISEA Z358.1

 

Engineering Details You Can Verify

 

 

304 Stainless Steel Piping System.

The pipes have a 1-1/4-inch diameter. This material resists corrosion in industrial environments. It prevents rust contamination in the water flow.

Independent Dual Controls.

The eye wash uses a light-push flag handle. The shower uses a light-pull triangular rod. These two controls work separately. Workers do not need to think about which action starts which function. This saves critical seconds in an emergency.

50-Mesh Inlet Strainer.

A stainless steel filter sits inside the basin water inlet. It stops debris and particles from entering the water flow. This prevents secondary eye injuries during flushing.

Factory Pre-Assembly and Testing.

Every unit leaves our factory fully assembled. Each unit passes a complete water pressure seal test. This removes leak risks during installation. Your installation team saves time on setup.

 

Quality Verification Before Shipment

 

 

Each Emergency Shower and Eyewash Station undergoes a full water pressure test before shipment. We check all valve operations for smooth movement. We verify seal integrity at 1.5 times normal working pressure. We provide a factory test report with every unit. This documentation supports your internal quality audits and safety inspections.

 

Customization and Selection Options

 

 

We offer material upgrades for highly corrosive environments. The ABS basin can be upgraded to 304 stainless steel. The cast iron base can be upgraded to all-stainless construction. We can add a stainless steel foot pedal for hands-free eye wash operation. For freezing conditions, we install self-regulating heat trace with insulation, suitable for -34.4°C environments. Our engineering team has over 15 years of experience. We provide configuration recommendations based on your site conditions.

 

Shipping and Delivery Information

 

 

Standard lead time is 15-25 working days. Each unit ships in a wooden crate with foam padding. The crate protects pipes, valves, and the basin during transit. We work with international freight forwarders for sea and air shipping. Bulk orders receive free reinforced packaging. Every shipment includes installation instructions and a maintenance log card.

Hot Tags: emergency shower and eyewash station, China emergency shower and eyewash station manufacturers, suppliers, factory, chemical spill shower, Combination Corrosion Resistant Shower and Eye Face Wash, emergency eyewash unit, industrial hygiene shower, wall mounted emergency shower, wall mounted eye wash station

Send Inquiry

Home

Phone

E-mail

Inquiry